Defects Fixed

The following defects were fixed in Version 1.3.1

• Using I equations on graphical variables would give wrong results in published models.
• Moving flow positions with the keyboard would not undo properly.
• The space bar was not always being recognized in stories in presentation mode.
• Importing model with conflicting module names could sometimes leave module names duplicated.
• Deleting stories could cause the software to crash.
• Changing discrete stock types could cause incorrect model results or other errors until the model was saved an reopened.
• After closing a model locked to only show the interface menus were left grayed.
• Turning on cycle time could leave to incorrectly constrained outflows.
• Deleting a dimension from a variable could cause a crash.
• Graphical frames were sometimes drawn outside the display area in published models.
• Cross level ghosts were not always appearing correctly in the causal lens.
• When using storytelling in presentation or experiment mode simulations would sometimes pause arbitrarily.
• Graphs on published models were not always displayed correctly in IE and Edge (this fix was applied to models published with 1.3 as well).
• Using a biflow on a non negative stock could incorrectly constrain the outflows of the stock.
• Flow ordering could sometimes be different in published models leading to different results.
• Text boxes with only spaces (sometimes used for borders) were reopening without the spaces and the prompt to type in text was therefore visible.
• Model view animations were not always responding to changes in the state.
• Deleting variables after deleting the active run in the data manager could cause the software to crash.

The following defects were fixed in Version 1.3

• Using both the INIT builtin and intial equations to break circularities could sometimes lead to spurious behavior.
• The ENDVAL builtin, when used with an explicit initial, would often return the second from last value in the previous simulation.
• Circularities involving Queue outflows were not always being correctly identified.
• Undo was not always maintaining discrete stock and flow attributes, such as capacities and leak zones, when variables were deleted or had their types changed.
• The graphical panel could sometimes get in a state where it would flicker between having, and not having, a vertical scroll bar.
• Parenthesis matching was not working for long equations.
• Labels in the equation panel were sometimes being truncated.
• The x-axis value displayed when scrubbing graphs could be misleading if the runs had different start or end points.
• Fixed scale graphs on the model would sometimes draw graph lines outside of the graph proper.
• Editing units could sometimes generate spurious unit errors.
• Changing a conveyor to a queue and back could sometimes cause spurious model results.

The following defects were fixed in Version 1.2.2

• The highlighting of name only converters for storytelling was not working correctly.
• Changing connections in a model that had implicit circularities requiring marking of stocks would sometimes cause spurious divide by 0 messages.
• Importing a mixture of overwriting and non-overwriting sources could cause the software to freeze.
• Connecting would sometimes fail because of incorrectly identified circularities.
• Closing models with separate initial equations would sometimes cause an error.
• Simulations were being stopped when shifting between model and interface.
• Data manager changes were not always correctly reflected on comparative graphs and tables.
• Exported variable markings were being incorrectly applied when connecting to a module.
• Graph labels were misleading when graph ranges were very small.
• There was excessive memory use on export.

The following defects were fixed in Version 1.2.1

• The DELAY and DERIVN builtins were not reporting correct values when using Runga Kutta integration (RK2 or RK4).
• Importing of multiple CSV files could cause extra values to be incorrectly added to graphicals and display spurious error messages.
• Undoing and redoing structure additions more than once could cause the software to crash.
• Very small graph scales could cause the graph to display incorrectly when values were out of bounds.
• Setting user parameters from the data manager or during import could cause leakage fractions to be set incorrectly.
• Sector positioning made it difficult to have the sectors directly touch so that all variables could be included in a sector.
• Exported CSV files were not correctly escaping quotes on variable names with embedded quotes.
• Negative polarity symbols where not being displayed correctly on the interface.
• Single clicking on knobs in explore mode when save all variables was not set would net reset the constant value.
• Changing the passthru nature of a stock (by creating or removing an implicit circularity) could cause the software to crash.
• Setting the report interval on a table to 0 could cause a crash.
• Extraneous highlighting was occurring in the equation panel with variable names requiring quotes.
• Selection of connector handles was difficult when many connectors were coming into a flow or converter.

The following defects were fixed in Version 1.2

• Reordering array elements was not always correctly reflected in Non Apply to All equations.
• Name positions set using the shift key (so that all 360 degrees of location can be used) were not all available.
• Some initial circularities involving conveyor leakages were not being detected.
• Thumbnails for interface pages would not always update when changes were made to pages.
• Architect and Designer would slow down after navigating through a large number of pages.
• Variable names in the simulation log did not always have module prefixes.
• Fixing import links sometimes required saving and reopening a model.
• Dimension mismatch corrections could sometimes leave variables marked invalid till a save and reopen.
• When both the interface and model window were open the model window would appear on top after exiting presentation mode.
• On some Windows computers connecting to our licensing server would unnecessarily require the web solution.
• Adding points to a graphical by typing in a new number of points would sometimes cause a y value to repeat, replacing many other values.
• On the interface, sliders for variables that are not constant could display incorrect values on hover.
• Importing modules that replaced an existing module could leave remnant cross level connections from the old module content.
• The equation viewer was always displaying the entire model instead of the module it was opened in.
• Array definitions added to a model on paste were not always enough to fully support the added equations.
• Units synonyms were not being added on paste.
• Publishing of models that use the INIT function was not always working correctly.
• Divide by 0 errors were not being reported on published or presentation mode models.

 

The following defects were fixed in Version 1.1.2

• After publishing a model macros could get stuck at their initial values causing erroneous results during simulations made from within Stella Architect or Stella Designer.
• Models using INIT builtin nested inside of other functions could produce incorrect results when published.
• Published models would sometimes preserve the incorrect number of runs for comparative graphs.
• Models using equations to compute array offsets were producing incorrect results when published.
• Simulation events could trigger incorrectly when entering Stella Live in presentation mode or on a published model.
• Stella Live was being disabled for models taking 1.2 seconds instead of the documented 10 seconds to simulate.
• Switching to presentation mode would sometimes clear graph results inappropriately.
• Models generating a divide by 0 could keep running beyond the normal end time when in presentation mode.
• Lab pack activations on the Mac could fail for some users.

The following defects were fixed in Version 1.1.1

• Comparative graphs with multiple pages would sometimes lose or reorder runs when moving between different pages.
• Typing in a value for a numeric or group input would show a rounded value instead of the value entered.
• The number of gridlines used by the Graphical Input on the interface was not always matching the number of points in the graphical function.
• Group input devices on the interface were not adjusting the row height in response to font changes.
• The CTMEAN, CTMIN and CTMAX functions were returning incorrect cycle time statistics.
• Thumbnail scrolling was uneven.
• Some version 10 model graphs would lose their multiscale attribute.
• Exiting Presentation Mode on the interface did not always work correctly.
• Better support for older graphics cards for Designer and Architect.
• Transit times, capacities and other attributes of discrete stocks that used equations were not being invalidated when variables were deleted from the model.
• When running models with the Simulation Log Panel open a large number of messaged coming into the panel would cause the software to response very slowly.
• The preference setting to not rescale graphs until the end of a run was being ignored in presentation mode on the interface and for published interfaces.
• Simulation events that cause a model to pause in a published interface would prevent results from the current time being correctly displayed in tables.
• Simulation events on models which did not have Pause before computing flows checked would delay result reporting.
• Locked tables and graphs from Version 10 models would end up being locked objects (and therefore selectable only by double clicking) when opened.
• Tables and group inputs from version 10 models would sometimes lose titles.

The following defects were fixed in Version 1.1

• The TRHOUGHPUT function was returning the wrong volume when DT was not 1. Similarly, the CTFLOW function wasn't initializing correctly when DT was not 1.
• CSV files with a byte order mark (BOM) for UTF8 weren't being imported correctly.
• Parameters weren't being validated for min < max in sensitivity testing.
• The RUNCOUNT builtin was incrementing during Stella Live.
• The decimal separator wasn't always correctly recognized on the panel with European number formatting active.
• Duplicate run names were being allowed after saving runs.
• Variables marked for import could have connections made to them from other variables.
• Flow order on non-negative stocks would sometimes be incorrect when implicit initialization circularities involving transit time were present.
• The Array Picker would sometimes appear when not needed, and not appear when needed, when editing equations.
• Deactivating an Import Control sheet wouldn't always reset the values to their model equations.
• The AltGR key was being interpreted as requesting a repeated action, making it difficult to enter some special characters in variable names.
• Copying and pasting between models would sometimes put incorrect styling on pasted elements.
• Shading on equation panel entries for non a2a equations wasn't displaying correctly in Windows 10.
• Bitmaps rendered to the Windows clipboard as companions for EMF content were of low quality.
• The MEAN function would generate a divide by zero error when applied to an empty queue.
• Sensi runs on models with comparative tables could cause the simulations to progress very slowly.
• Non-negative stocks under RK4 integration could sometimes go negative.
• Run specs wasn't validating start and stop times.
• Reloading runs in the data manager wasn't working correctly with graphicals.

The following defects were fixed in Version 1.0.3

• Graphics frames won't draw a border if none is selected.
• The graphs associated with graphicals weren't drawing on computers configured to use commas as a decimal delimiter (i.e., 1,234 instead of 1.234).
• Better layout of the legend when there were multiple labels.
• Sensitivity simulations are much faster when there are comparative graphs visible.
• The list of undo commands would sometimes include actions that were no longer relevant after multiple changes were reverted.
• Dial positions in Stella Live weren't consistently maintained for variables with a specified input range.
• Posters with navigation would sometimes cause unexpected behavior when they were triggered.
• Scales and ranges on ghosts weren't changing the underlying variable value.
• Pasting graphical points into Excel wasn't organizing the data correctly.
• Flows dragged to the left or top of a diagram could be placed out of range for further editing.
• The Find was organizing variables by subtypes of the basic stock, flow, converter types.
• Initial value circularity errors could persist after being corrected until a model was closed and opened.
• Some equations included in Delay Converters weren't being checked correctly for circularity.
• Drag and drop into the panel would sometimes change list order.

The following defects were fixed in Version 1.0.2

• Output formatted as currency wouldn't always display the $ sign.
• Text boxes could lose their borders when opened in STELLA/iThink Version 10.
• The Find dialog wouldn't show all modules in a model when ordered by module.
• Cross level flows would sometimes save the constrained values of the flow used.
• Ad-hoc sensitivity values would sometimes drop the first entry.
• Input devices, numerical displays, and storytelling could be moved or partially lost when moving back and forth between Stella Professional and STELLA/iThink Version 10.
• The INIT builtin wouldn't always give the same results on each simulation for models that required multiple pass initialization due to cross dependencies of conveyor transit times on initial stock values.
• The Instantaneous argument to the CTMAX and CTMIN builtins wasn't working correctly. The documentation on CTMEAN, CTSTDDEV, and CYCLETIME has also been corrected.
• Renaming modules would sometimes leave equations using cross level ghosts in an invalid state.
• Some units equations were being incorrectly processed, which could cause the software to hang or close.
• Running models with cycle-time active could sometimes cause outflows to be constrained based on inflow timing.
• Builtins nested in the initial arguments of other builtins would sometimes cause initial value circularity errors to be missed.
• Stock outflow priorities could change in models where inflows had a dependency of the outflows of non-negative stocks.
• Not all undone actions were being deleted when making changes after an undo, which could cause unexpected results on later undo attempts.
• Error messages displayed at the bottom weren't always updating correctly after changing equations.
• Showing tooltip values on multidimensional arrays could cause the software to crash.
• Importing data without the overwrite option selected would only be active for a single run (the way this is done has also changed in 1.0.2).

The following defects were fixed in Version 1.0.1

• Numbers exported from tables weren't following the language and region settings of the local computer when being formatted.
• Multiple outflows from queues weren't executing when higher priority downstream stocks had positive, but limited, inflows.
• Multiple message posters marked to be shown only once weren't being shown when the posting condition occurred after the first run.
• When running models with Cycle-Time, biflows weren't being allowed to go negative.
• The revert button on the equation panel didn't always work properly.
• Uniform sensitivity parameters were being saved as Normal.
• MODULO wasn't working when the base was 1.0.
• Flow units inside of modules weren't always being correctly computed.
• Tabbing between array elements in non-apply-to-all equations would sometimes cause crashes.
• Modules didn't support pictures as display icons.
• The Display panel would sometimes show units for variables that hadn't been assigned units.
• Creation of cross level flow ghosts would sometimes cause the software to crash.
• Connecting flows to stocks would fail for certain geometries.